The day's work on Naiad began with the purchase of an 8' x 4' sheet of shuttering plywood. I'm not going to fit bunk cushions yet and the plywood will be cut to the correct shape and used to strengthen the slats. Later more shopping was done when I bought some cable clips for the wiring that I hope to get done soon. The it was time to set to work on Naiad herself.
This is the first part of the heater guard. It will be fixed to the coachroof and will cover the flue. I'll make another piece to cover the body of the heater later.
The slots in the light mounts for the wires were cut.
And the shuttering plywood marked out and cut to shape.