2020.07.12 - The Next Major Job II
Three hours after the last posts time for an update as the epoxy is cured.
The bulkhead with the peel ply removed.
And the peel ply removed from the hull
A close-up of the epoxy surface and you can see the stippled effect that the peel has left in the surface.
Here's a view of the other part of the epoxied surface and from this angle the stippling is very evident.
So, I plan to put the bulkhead back in place but only with a couple of screws holding it in place. this will give the cockpit a little more rigidity whilst I work on the starboard side. Once both sides are prepared then I'll do the epoxy work to fix them in place permanently all in one go.
Time for a fresh cup of tea.